CMMP_AS

Motor controller

Scraped SKU: 1622904 2026-06-05 10:03:48

Attributes

Order CodeCMMP-AS-C10-11A-P3-M0
Gtin4052568243272

Description

The servo motor controller (servo drive) CMMP-AS is the extremely functional solution for dynamic movements and with expansion options, e.g. for EtherCAT® connection or safety module. • Many interfaces and functions for decentralized motion functions (flying saw, flying measurement, modulo function, etc.) • Optional: integrated cam disk controllers and highly dynamic movements • Standardized interfaces allow seamless integration in mechatronic multi-axis modular systems • Reliable and easy commissioning and parameterization with the Festo Configuration Tool (FCT) • Optionally with 3 slots for extension modules • Variants with safety functions • 255 positioning records

Specifications

Type of mountingOn sub-base, Screwed on
Product weight3800 g
Display7-segment display
CertificationRCM compliance mark, c UL us - Listed (OL)
CE marking (see declaration of conformity)As per EU EMC directive, as per EU machinery directive, As per EU RoHS directive
UKCA marking (see declaration of conformity)To UK instructions for machines, To UK RoHS instructions
Certificate issuing authorityGerman Technical Control Board (TÜV) Rheinland 01/205/5262.03/25
Storage temperature-25, 70 °C
Ambient temperature0, 40 °C
Relative air humidity0 - 90%
Degree of protectionIP10, IP20
Contamination level2
Note on materialsRoHS compliant
LABS (PWIS) conformityVDMA24364 Zone III
Nominal operating voltage phasesThree-phase
Nominal operating voltage AC400 V
Permissible voltage fluctuations+/- 10%
Input voltage range AC230, 480 V
Mains frequency50, 60 Hz
Nominal current11 A
Line filterIntegrated
Max. DC link voltage560 V
Braking resistor68 Ohm
Pulse power of braking resistor8.5 kVA
Nominal voltage, logic supply DC24 V
Permissible range of logic voltage±20%
Max. current consumption for logic supply without clamping brake1 A
Output voltage range AC3x 0 - 360 V
Nominal output current10 A
Nominal current per phase, effective10 A
Peak current per phase, effective20 A
Max. peak current duration5 s
Controller nominal power6000 VA
Peak power12000 VA
Output frequency0, 1000 Hz
Parameterization interfaceParameterization and commissioning, USB, Ethernet
Fieldbus couplingCANopen, Modbus/TCP
Communication profileDS301/DSP402
Process interfacingI/O coupling, For 256 positioning records
Max. fieldbus transmission rate1 Mbit/s
Bus connectionPlug, 9-pin, Sub-D
Encoder interface output, characteristicsResolution 16384 ppr
Output encoder interface, functionActual value feedback via encoder signals in speed control mode., Setpoint specification for downstream slave actuator.
Encoder interface input, characteristics3-phase encoder signals, EnDat, HIPERFACE, RS422, SINCOS
Input encoder interface, functionEncoder signal speed setpoint value., As speed setting of the slave actuator in synchronous mode.
Number of digital logic inputs10
Characteristics of logic inputGalvanically isolated, Freely configurable
Work range of logic input8, 30 V
Number of digital logic outputs 24 V DC5
Characteristics of digital logic outputsGalvanically isolated, Freely configurable in some cases
Max. current of digital logic outputs100 mA
Number of analog setpoint inputs2
Characteristics of setpoint inputsDifferential inputs, Configurable for speed, Configurable for current
Work range of setpoint input± 10 V
Impedance of setpoint input20 kOhm
Number of analog monitor outputs2
Working range of monitor outputs± 10 V
Resolution of monitor outputs9 bit
Characteristics of monitor outputsShort circuit-proof
Safety functionSafe torque off (STO), Safe stop 1 (SS1)
Safety integrity level (SIL)Safe torque off (STO)/SIL 3/SILCL 3
Performance Level (PL)Safe torque off (STO)/category 4, performance level e
Diagnostic coverage97 %
SFF safe failure fraction99.17 %
Hardware fault tolerance1
Proof test interval20 a

PDF Documents

Document Open PDF