Attributes
| Order Code | DRVS-25-270-P-EX4 |
|---|---|
| Gtin | 4052568265236 |
Description
Light and elegant: double-acting semi-rotary actuator with rotary vane.
• Double-acting rotary vane actuator
• Lighter than other quarter turn actuators
• Fixed swivel angle, adjustable swivel angle possible with the help of accessories
• Housing protected against splash water and dust
• Sustainable in production due to reduction of material use
Specifications
| Size | 25 |
|---|---|
| Cushioning angle | 0.5 deg |
| Swivel angle | 0, 270 deg |
| Permissible stop radius | 21 mm |
| Cushioning | Elastic cushioning rings/pads at both ends |
| Mounting position | Any |
| Mode of operation | Double-acting |
| Structural design | Rotary vane |
| Position sensing | Via proximity switch |
| Symbol | 00991265 |
| Variants | Spigot shaft |
| Operating pressure | 2, 8 bar |
| Max. swivel frequency at 6 bar | 2 Hz |
| Repetition accuracy | 1 deg |
| CE marking (see declaration of conformity) | as per EU explosion protection directive (ATEX) |
| UKCA marking (see declaration of conformity) | acc. to UK EX instructions |
| Explosion protection certification outside the EU | EPL Db (GB), EPL Gb (GB) |
| Explosion prevention and protection | Zone 1 (ATEX), Zone 1 (UKEX), Zone 2 (ATEX), Zone 21 (ATEX), Zone 21 (UKEX), Zone 22 (ATEX) |
| ATEX category gas | II 2G |
| ATEX category for dust | II 2D |
| Type of ignition protection for gas | Ex h IIC T4 Gb X |
| Type of (ignition) protection for dust | Ex h IIIC T120°C Db X |
| Explosive ambient temperature | 0°C <= Ta <= +60°C |
| Operating medium | Compressed air as per ISO 8573-1:2010 [7:4:4] |
| Information on operating and pilot media | Operation with oil lubrication possible (required for further use) |
| Corrosion resistance class (CRC) | 1 - Low corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B2-L |
| Suitability for the production of Li-ion batteries | Suitable for battery production with reduced Cu/Zn/Ni values (F1a) |
| Cleanroom suitability, measured according to ISO 14644-14 | Class 5 according to ISO 14644-1 |
| Ambient temperature | 0, 60 °C |
| Max. stop force | 320 N |
| Max. axial force | 40 N |
| Max. radial force | 60 N |
| Theoretical torque at 6 bar | 5 Nm |
| Permissible mass moment of inertia | 0.012 kgm² |
| Product weight | 486 g |
| Type of mounting | With internal thread |
| Pneumatic connection | M5 |
| Note on materials | RoHS compliant |
| Drive shaft material | Steel, nickel-plated |
| Seals material | TPE-U(PU) |
| Housing material | Die cast aluminum, painted |
PDF Documents
Document
Open PDF