Attributes
| Order Code | DRVS-6-180-P |
|---|---|
| Gtin | 4052568264123 |
Description
Light and elegant: double-acting semi-rotary actuator with rotary vane.
• Double-acting rotary vane actuator
• Lighter than other quarter turn actuators
• Fixed swivel angle, adjustable swivel angle possible with the help of accessories
• Housing protected against splash water and dust
• Sustainable in production due to reduction of material use
Specifications
| Size | 6 |
|---|---|
| Cushioning angle | 0.5 deg |
| Swivel angle | 0, 180 deg |
| Permissible stop radius | 10 mm |
| Cushioning | Elastic cushioning rings/pads at both ends |
| Mounting position | Any |
| Mode of operation | Double-acting |
| Structural design | Rotary vane |
| Position sensing | Via proximity switch |
| Symbol | 00991265 |
| Variants | Spigot shaft |
| Operating pressure | 3.5, 8 bar |
| Max. swivel frequency at 6 bar | 3 Hz |
| Repetition accuracy | 1 deg |
| Operating medium | Compressed air as per ISO 8573-1:2010 [7:4:4] |
| Information on operating and pilot media | Operation with oil lubrication possible (required for further use) |
| Corrosion resistance class (CRC) | 1 - Low corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B2-L |
| Suitability for the production of Li-ion batteries | Suitable for battery production with reduced Cu/Zn/Ni values (F1a) |
| Cleanroom suitability, measured according to ISO 14644-14 | Class 5 according to ISO 14644-1 |
| Ambient temperature | 0, 60 °C |
| Max. stop force | 15 N |
| Max. axial force | 10 N |
| Max. radial force | 15 N |
| Theoretical torque at 6 bar | 0.15 Nm |
| Permissible mass moment of inertia | 6.5E-4 kgm² |
| Product weight | 38 g |
| Type of mounting | With internal thread |
| Pneumatic connection | M3 |
| Note on materials | RoHS compliant |
| Drive shaft material | high-alloy stainless steel |
| Seals material | TPE-U(PU) |
| Housing material | Wrought aluminum alloy, anodized |
PDF Documents
Document
Open PDF