Attributes
| Order Code | DDLI-40- - |
|---|
Description
Pneumatic positioning actuator with non-contact linear potentiometer, for attaching to customer's own guides.
• Based on linear actuator DGC-K
• Without guide
• With linear potentiometer for contactless measurement
• Suitable for positioning with stepping motor driver CPX-CMAX
• Suitable for end-position control with end-position controller CPX-CMPX or SPC11
• Measures absolute values
• Can be used as a measuring cylinder
• Protection: IP67
• For attachment to customer's own guide
• Supply ports on end face
Specifications
| Stroke | 100, 2000 mm |
|---|---|
| Piston diameter | 40 mm |
| Cushioning | Elastic cushioning rings/pads at both ends |
| Mounting position | Any |
| Position sensing | With integrated linear potentiometer |
| Operating pressure | 29, 116 psi |
| Mode of operation | Double-acting |
| Certification | RCM compliance mark |
| CE marking (see declaration of conformity) | As per EU EMC directive, As per EU RoHS directive |
| UKCA marking (see declaration of conformity) | To UK RoHS instructions |
| Operating medium | Compressed air as per ISO 8573-1:2010 [6:4:4] |
| Information on operating and pilot media | Operation with oil lubrication not possible |
| Corrosion resistance class (CRC) | 1 - Low corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B2-L |
| Ambient temperature | -10, 60 °C |
| Theoretical force at 6 bar, retracting | 754 N |
| Theoretical force at 6 bar, advancing | 754 N |
| Type of mounting | With accessories |
| Pneumatic connection | G1/4 |
| Cover material | Wrought aluminum alloy |
| Seals material | NBR, TPE-U(PU) |
PDF Documents
Document
Open PDF