Attributes
| Order Code | MS12N-LFR |
|---|
Description
All functions for the preparation of compressed air: valves for pressure regulation, shut off, filter regulation, and soft start, with safety function; pressure and flow sensors, filter, dryer, water trap, sensors, lubricator, and distributor. In sizes 4, 6, 9, and 12.
• With NPT connecting thread
• Piloted diaphragm regulator without internal air consumption
• Good regulation characteristics with minimal pressure hysteresis and primary pressure compensation
• Good particle and condensate separation
• With or without secondary venting
• High flow rate
• Lockable rotary knob
• Return flow option for exhausting from output 2 to input 1 already integrated
• Standard nominal flow rate <=22.000 l/min with grid dimension 124 mm
Specifications
| Size | 12 |
|---|---|
| Series | MS |
| Actuator lock | Rotary knob with detent, Rotary knob with integrated lock, can be closed with accessories |
| Mounting position | Vertical ±5° |
| Condensate drain | Fully automatic, electrically controlled, Manual, non-detenting, Manual, rotating |
| Structural design | Filter regulator with pressure gauge |
| Degree of condensate separation | 75 % |
| Pressure gauge | with pressure gauge |
| Max. pressure hysteresis | 0.4 bar |
| Operating medium | Compressed air as per ISO 8573-1:2010 [7:4:-], Inert gases |
| Corrosion resistance class (CRC) | 2 - Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Storage temperature | -10, 60 °C |
| Air quality class at the output | Compressed air as per ISO 8573-1:2010 [6:4:4], Compressed air as per ISO 8573-1:2010 [7:4:4] |
| Temperature of medium | -10, 60 °C |
| Ambient temperature | -10, 60 °C |
| Type of mounting | With accessories |
| Housing material | Die-cast aluminum |
| Material of bowl | Wrought aluminum alloy |
PDF Documents
Document
Open PDF